Stamping Gel Paint Bundle#1 - Item#015-017

$19.95

Bundle #1 contains the following 6 colors of GEL STAMPING PAINT. *Must be cured to prevent smearing*

1- Shining Green

2- White

3- Shining Golden

4- Dark Cyan

5- Burgundy Red

6- Purple


How to use:

  1. Apply Base coat

  2. Cure under lamp for 2 minutes

  3. Apply nail powder - dust off excess

  4. Apply Matte Effects Gel or Base coat

  5. Cure for 2 minutes

  6. Apply a small amount of gel paint to your stamping plate

  7. Using scraper - scrape the paint over your chosen design, using a 45 degree angle. Scrape top to bottom or left to right. Do not scrape gel paint back & forth

  8. Use your jelly stamper to pick up your image by using a forward-backward or left- right motion

  9. Transfer design to nail in your desired position

  10. Cure design under lamp for 1 minute

  11. Apply topcoat

  12. Cure until dry

*BEFORE USING - SHAKE GEL TUBE AND SQUEEZE THE TUBE GENTLY (with the cap on) SEVERAL TIMES TO ENSURE GEL IS THROUGHLY MIXED

Warnings:

Flammable

Keep away from heat sources & open flames

For external use only

Avoid contact with skin & eyes

If irritation occurs, discontinue use & consult your physician

Keep out of reach of children

Ingredients:

Ethylene Caprolactam / VP / Dimethylaminoethyl Methacrylate Copolymer -75%

Glyceryl Polyacrylate - 14%

Glyceryl Polymethacrylate - 11%

Bundle #1 contains the following 6 colors of GEL STAMPING PAINT. *Must be cured to prevent smearing*

1- Shining Green

2- White

3- Shining Golden

4- Dark Cyan

5- Burgundy Red

6- Purple


How to use:

  1. Apply Base coat

  2. Cure under lamp for 2 minutes

  3. Apply nail powder - dust off excess

  4. Apply Matte Effects Gel or Base coat

  5. Cure for 2 minutes

  6. Apply a small amount of gel paint to your stamping plate

  7. Using scraper - scrape the paint over your chosen design, using a 45 degree angle. Scrape top to bottom or left to right. Do not scrape gel paint back & forth

  8. Use your jelly stamper to pick up your image by using a forward-backward or left- right motion

  9. Transfer design to nail in your desired position

  10. Cure design under lamp for 1 minute

  11. Apply topcoat

  12. Cure until dry

*BEFORE USING - SHAKE GEL TUBE AND SQUEEZE THE TUBE GENTLY (with the cap on) SEVERAL TIMES TO ENSURE GEL IS THROUGHLY MIXED

Warnings:

Flammable

Keep away from heat sources & open flames

For external use only

Avoid contact with skin & eyes

If irritation occurs, discontinue use & consult your physician

Keep out of reach of children

Ingredients:

Ethylene Caprolactam / VP / Dimethylaminoethyl Methacrylate Copolymer -75%

Glyceryl Polyacrylate - 14%

Glyceryl Polymethacrylate - 11%